Figure 3-12
Disassemble the Speed dome
Step 4
Install the micro SD card.
Insert the micro SD card to the SD card slot in the correct direction. The SD card slot is on the
bottom of camera module. Be sure that the SD card is clicked into place.
Step 5
Install the lower dome back and tighten the two lock screws.
Step 6
Hook the two ends of the safety rope to the back box of the speed dome and the wall mount
respectively. Route the cables through the mount as shown follows.
Figure 3-13
Safety Rope
Step 7
Loosen the lock screws on the wall mount as shown below.
Step 8
Align the speed dome with wall mount and rotate it counterclockwise or clockwise to the mount
tightly as shown below.
Figure 3-14
Align to the Mount
IPC6512-Z30&6522-Z30&6622-Z30
Installation Guide
3 Installation
Issue 02 (2014-12-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
