Figure 4-6
Assembling the dome body and the quick mounting board
----End
4.3 Connect Device Cables
l
Connect device corresponding power and audio cable well according to requirement, and
then use insulated tape to twine the connection respectively to make it waterproof.
l
Connect the grounding hole (
) to ground wire, which can improve device reliability
efficiently. The grounding hole is located next to the cable exit on the back of bottom
cover; the specification of ground screw is M2.5.
l
Connect alarm input and output terminal to external cable according to
, and use insulated tape to twine connection to make it
waterproof.
l
Connect network cable to corresponding network port of the device cable according to
(Optional) Install the Waterproof Connector
.
Connect the Alarm Input / Output Port
Step 1
Connect alarm input device to the alarm input of I/O port.
When the input signal is idle or grounded, the device can collect the different statuses of the
alarm input port. When the input signal is connected to 3.3 V or it is idle, the device collects
the logic "1". When the input signal is grounded, the device collects the logic "0".
IPC6061-FP
Quick Start Guide
4 Installation
Issue 01 (2019-02-22)
Copyright © Huawei Technologies Co., Ltd.
14
