Step 6
Click
Save
to complete modification of device IP address.
----End
5.3 Login Web Interface
Step 1
Open Internet Explorer, enter the modified camera IP address in the address box, and press
Enter
.
NOTE
l
HTTP is an insecure protocol which may incur security risks. Therefore, you need to enable the
HTTPS protocol to enhance system security. For details, see
HTTPS
in the
User Manual
.
l
After the HTTPS protocol is enabled, you are advised to access the camera web page by entering
https://camera IP address
in the address box of your web browser.
Step 2
Please operate according to the interface prompt if the interface displays guide of
Online
Upgrade
.
Step 3
Enter the user name and password and click
Login
.
Step 4
For the first login, click
Please click here to download and installthe plug-in.
,
Install
controls as prompted.
Step 5
The main interface will be shown in after control installation is completed.
Figure 5-4
Web Interface
----End
IPC6061-FP
Quick Start Guide
5 Network Configuration
Issue 01 (2019-02-22)
Copyright © Huawei Technologies Co., Ltd.
20