Figure 4-1
SD card installation diagram
Step 2
Adjust the direction of SD card, insert it into the slot and install the SD card properly.
Step 3
Tighten back the screws on the SD card cover.
----End
4.2 Fix Device
NOTE
The device mounting device needs to sustain at least 3X weight of bracket and camera.
Network camera can be directly placed on the desktop for monitoring, it can also use bracket
to install the device on the ceiling, which means there are three types of installation modes
which are ground mount, ceiling mount and wall mount. The following chapter is an example
of ceiling mount.
Before you complete the installation and debugging, do not remove the electrostatic attraction
film on the transparent enclosure. Otherwise it may result in injury. After removing the
electrostatic attraction film, do not touch dome enclosure in case it may leave stain.
IPC6061-FP
Quick Start Guide
4 Installation
Issue 01 (2019-02-22)
Copyright © Huawei Technologies Co., Ltd.
11
