2 Product Overview
HUAWEI HG231f Wireless-N Router
User Guide
2-2
Issue 01 (2010-04-01)
-to-peer
(P2P) software
iguration through a Web-based configuration utility
2.2.1 Interfaces and Buttons
Table 2-1 describes the interfaces and buttons of the router.
Table 2-1
uttons of
z
Traffic control through which you can manage the downloading rate of peer
z
Local and remote conf
2.2 Hardware
Interfaces and b
the router
Interface or Button
Description
POWER
In
N
dapter to the
terface used to connect the power adapter to the router.
OTE
To power on the router, connect the power a
POWER interface of the router and then to a power socket.
Then supply the power socket with electricity.
RESET
s of the router, power on the
press and hold the RESET button for at least 3s,
an
N
caution.
To restore the factory setting
router,
d then release the button.
OTE
When the factory settings are restored, your custom data is
lost. Therefore, use the RESET button with
LAN1–LAN4
Ethernet interfaces used to connect Ethernet devices,
such as PCs and switches, to the router.
WAN
terface used to connect Ethernet devices that
s modems and
Ethernet in
provide Internet access interfaces, such a
switches.
WPS
Button used to enable the WPS function.
WPS is a standard for easy and secure establishment of a WLAN. Through the WPS function,
WLAN on your wireless terminal devices securely without entering the name
ord of the WLAN.
2.2.2 In
Table 2-2 describes the indicators of the router.
you can access a
and passw
dicators
