3
Installing Cables
1. Take a cable clip out of the installation
accessory package and install it on the AC
PSU.
Install the AC power cable.
c
a
C2. Fixed AC power cable (in an 800-mm-deep cabinet)
1. Secure the power cable on the AC PSU
using a plastic binding strap.
2. Secure other AC power cables in the
same way.
C1. Fixed AC power cable (in a 1000-mm-deep cabinet)
2. Open the power cable clip and slide it outwards.
3. Insert the power cable into the clip.
4. Slide the clip to the joint between the AC
power cable and the connector.
5. Close the clip to fasten the AC power cable.
6. Secure other AC power cables in the same way.
Installing Optical Modules and Cables
1. Hold the optical module and insert it to position until it cannot move forward.
2. Insert the optical fiber into the optical module until the spring snaps into position.
GE/10GE optical module and optical fiber
40GE optical module and optical fiber