1
Install the subrack.
a
Installing the OSTA5.0 (3 U)
1. The following figure shows the slot layout in the subrack.
Slide the subrack into the cabinet along the guide rails, and then tighten the screws on the panel.
Before the installation, wear an ESD wrist strap or a pair of ESD gloves to prevent damage to the
subrack by static electricity.
Install boards.
b
2. Slide the boards into the corresponding slots, and then tighten the screws on the panel.
eCNS280 Quick Installation Guide
V100R005C00 01
Note
