9
No.
Item
Description
19
AUDIO
key
Switch the audio feed for the channel (when available).
20
MUTE
key
Mute or unmute the STB.
21
STANDBY
key
Switch the STB between active and standby modes.
22
The green
indicator
Flash when you press the remote control keys (but the
learning keys).
4.3 Learning function
If you don’t press any button or send a signal in 10 seconds, it will
quit from learning mode automatically.
There are only 4 keys in the
TV learning
with learning function. The
other keys for set-top box are without learning function.
Through the set up for learning function, the 4 learnable keys can be
updated by learning other different brands TV remote control.
This remote control can be suitable for most of television, but not all
television. If you have any questions, please contact with the
manufactory immediately.
The remote control cannot learn the universal TV remote control.
(For example: Learn the POWER key from the TV remote control)
Step 1
Press the
STUDY
key in the
TV learning
keypad panel continuously for 2
seconds. Until the LED gradually flash red to keep lighting, release the key.
Step 2
Press the
POWER
key on the remote control within 10 seconds, then the
red LED is flashing; it means this button is ready to receive the code.
Step 3
Aim the emission port of the original TV remote control at the emission port
of your set-top box remote control (distance between these two ports is
about 2~3 cm).
Step 4
Then press the Power key of your original TV remote control continuously
for 10 seconds to transmit the learning signal.
1.
If the LED will flash quickly for three times and keep lighting, it means
the set-top box remote control succeeds in receiving the signal and you
have completed the study procedure of the POWER key.
2.
If the LED doesn’t display the same as in step 4, which means the
learning signal is not accepted by the set-box remote control, and you
should repeat step 2-4.
Step 5
Repeat the above process to learn the other three keys. Once you finished to
