Huawei BTS3902E WCDMA Installation Manual Download Page 23

Page: 23 / 113

Information About the Installation

About This Chapter

This chapter describes the information that you must be familiar with before installing a
BTS3902E, including the BTS3902E exterior, ports, installation options, physical supports, and
installation clearance requirements.

3.1 BTS3902E Exterior

Th BTS3902E has a modular design with its ports on the bottom.

3.2 BTS3902E Ports

The BTS3902E ports are on the bottom, and the indicators are in the indicator on the front.

3.3 BTS3902E Indicators

A BTS3902E has six indicators, which indicate the running status of the BTS3902E.

3.4 BTS3902E Installation Options

This section describes the BTS3902E installation options. A BTS3902E can be installed on a
pole, wall, or wood pole.

3.5 Installation Clearance Requirements

This section describes the clearance requirements for installing a BTS3902E on a pole, wall, or
wood pole.

BTS3902E WCDMA
Installation Guide

3 Information About the Installation

Issue Draft A (2011-06-30)

Huawei Proprietary and Confidential

3-1

Summary of Contents for BTS3902E WCDMA


















































































































Search results

Summary of Contents for BTS3902E WCDMA

Reviews:

Related manuals for BTS3902E WCDMA

Brands by name

Popular brands

Huawei BTS3902E WCDMA, Installation Manual

Search results

Summary of Contents for BTS3902E WCDMA

Reviews:

Related manuals for BTS3902E WCDMA

Brands by name

Popular brands