manualshive.com logo in svg

Huawei AR150/200 Series, Configuration Manual

The Huawei AR150/200 Series Configuration Manual is a comprehensive guide that enables users to easily set up and optimize their Huawei AR150/200 devices. This manual can be downloaded for free from our website, manualshive.com, providing users with a user-friendly resource to maximize their device's potential.

Share
Download
background image

Link aggregation 
enabled :No                                                    
Aggregation port ID      :
0                                                     
Maximum frame Size       :
1628                                                  
                                                                                
MED port 
information                                                            
                                                                                
Media policy type   :Voice                                                     
Unknown 
Policy      :Defined                                                        
VLAN 
tagged         :Yes                                                         
Media policy VlanID           :
0                                                
Media policy L2 priority      :
6                                                
Media policy Dscp             :
46                                                
                                                                                
Power 
Type               :Unknown                                               
PoE PSE power 
source     :Unknown                                               
Port PSE 
Priority        :Unknown                                               
Port Available power value:
2                                                    
  ---- More 
----                                                                                   

# View the neighbor information of RouterA.

<RouterA> 

display lldp neighbor interface ethernet 0/0/0

Ethernet0/0/0 has 1 neighbors:                                     
                                                                                
Neighbor index : 
1                                                              
Chassis 
type   :macAddress                                                      
Chassis ID     :
00e0-11fc-1710                                                  
Port ID 
type   :interfaceName                                                   
Port ID        :Ethernet0/0/0                                            
Port description    :HUAWEI, AR Series, Ethernet0/0/0 Interface     
System name         :RouterB  
System description  :Huawei AR200 Huawei Versatile Routing Platform Software  V
RP (R) software,Version 5.100 (AR200 V200R002C00) Copyright (C) 2000-2011 
Huawei
 Technologies Co., Ltd      
System capabilities 
supported   :bridge                                         
System capabilities 
enabled     :bridge                                         
Management address 
type  :ipV4                                                  
Management address       : 
10.10.10.2                                            
Expired time   :
104s                                                            
                                                                                
                                                                                
Port VLAN ID(PVID)  :
1                                                          
VLAN name of VLAN  1: 
VLAN1                                                     
Protocol identity   :STP RSTP/MSTP LACP EthOAM 
CFM                              

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management

3 LLDP Configuration

Issue 02 (2012-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

84

Summary of Contents for AR150/200 Series



















































































































































































































































































Reviews:

No comments

Related manuals for AR150/200 Series

Habitat M10 Installation Manual preview
M10
Brand: Habitat Pages: 48
LaCie d2 Network 2 Quick Install Manual preview
d2 Network 2
Brand: LaCie Pages: 44
LaCie LaCie Ethernet Disk Datasheet preview
LaCie Ethernet Disk
Brand: LaCie Pages: 2
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Brand: LaCie Pages: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Brand: LaCie Pages: 14
LaCie 12big Rack Fibre 8 Quick Install Manual preview
12big Rack Fibre 8
Brand: LaCie Pages: 9
OCCITALINA OXTOPUS EIA-709 User Manual preview
OXTOPUS EIA-709
Brand: OCCITALINA Pages: 54
QNO 2WAN 3LAN User Manual preview
2WAN 3LAN
Brand: QNO Pages: 106
Face XR18 User Manual preview
XR18
Brand: Face Pages: 8
Delta Electronics Ethernet Communication Module DVPEN01-SL Manual preview
Ethernet Communication Module DVPEN01-SL
Brand: Delta Electronics Pages: 54
NETGEAR RAXE500 User Manual preview
RAXE500
Brand: NETGEAR Pages: 169
US Robotics USR8700 Quick Installation Manual preview
USR8700
Brand: US Robotics Pages: 36
Belkin F5D5230 Quick Setup Manual preview
F5D5230
Brand: Belkin Pages: 2
Behringer B-Control Fader BCF2000 Quick Start Manual preview
B-Control Fader BCF2000
Brand: Behringer Pages: 13
Allied Telesis AT-TN7100 User Manual preview
AT-TN7100
Brand: Allied Telesis Pages: 2
Kentrox RMM-1400 Configuration Manual preview
RMM-1400
Brand: Kentrox Pages: 246
Lanner NCA-6520 User Manual preview
NCA-6520
Brand: Lanner Pages: 141
Amphenol C2LINX Series Installation Manual preview
C2LINX Series
Brand: Amphenol Pages: 43

Brands by name

Popular brands

Load more brands