Step 5
(Optional)Run:
destination-port
port-number
The destination port number is configured.
Step 6
Run:
send-trap
rtd
Sending trap messages when the transmission delay exceeds the threshold is enabled.
By default, the trap function is disabled.
----End
6.16.6 Checking the Configuration
After the trap function is enabled in an NQA test instance, you can view trap messages in the
trap buffer.
Prerequisites
The configurations of the Trap function are complete.
Procedure
Step 1
Run the
display trapbuffer
[
size
value
] to view the trap messages sent in an NQA test.
----End
Example
Run the
display trapbuffer
[
size
value
] command. If information about the trap messages is
displayed, it means that the configuration succeeds.
For example:
<Huawei>
display trapbuffer size 2
Trapping buffer configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , channel name : trapbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 11
#May 6 2009 12:54:17+00:00 CBB6-PE3 SINDEX/4/INDEXMAP:OID
1.3.6.1.4.1.2011.5.25.110.2.0.1 ShortIFIndexMapTable changed.
#May 6 2009 11:02:37+00:00 CBB6-PE3 SRM_BASE/4/ENTITYREGSUCCESS: OID
1.3.6.1.4.1.2011.5.25.129.2.1.18 Physical entity register succeeded.
(EntityPhysicalIndex=17367040, BaseTrapSeverity=2, BaseTrapProbableCause=70144,
BaseTrapEventType=5, EntPhysicalContainedIn=1677721
6, EntPhysicalName="SRU slot 9", RelativeResource="", ReasonDescription="MPU9")
6.17 Configuring Test Results to Be Sent to the FTP Server
This section describes how to configure the system to send test results to the FTP server to avoid
loss of test results in the event that the NMS does not poll the test result in time.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
6 NQA Configuration
Issue 02 (2012-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
191
