Huawei ACBox2000-21-D-A User Manual Download Page 47

Page: 47 / 50

ACBox2000-21-D-A
User Manual (Pan-Europe Edition)

6 System Commissioning

Issue 01 (2016-12-15)

Huawei Proprietary and Confidential

After checking that all the preceding items are passed, close the chassis door. For detailed operations,
see section

5.8 Closing the Chassis Door

6.2 System Power-On

Procedure

Step 1

Switch on the output circuit breaker at the low-voltage side of the box-type transformer for
the ACBox2000.

Step 2

Check that the output voltage of the ACBox2000 is consistent with the AC voltage at the
low-voltage side of the box-type transformer using a multimeter.

Step 3

Turn the switch handle on the chassis door to ON.

----End

6.3 Powering Off the ACBox2000

Procedure

Step 1

Send a shutdown command to inverters from the SUN2000 app, SmartLogger, or NetEco.

Step 2

Turn off all DC switches of the two inverters that connect to the ACBox2000.

Step 3

Switch off the output circuit breaker at the low-voltage side of the box-type transformer for
the ACBox2000.

Step 4

Turn the switch handle on the chassis door to OFF.

----End

Summary of Contents for ACBox2000-21-D-A



















































Search results

Summary of Contents for ACBox2000-21-D-A

Reviews:

Related manuals for ACBox2000-21-D-A

Brands by name

Popular brands

Huawei ACBox2000-21-D-A, User Manual

Search results

Summary of Contents for ACBox2000-21-D-A

Reviews:

Related manuals for ACBox2000-21-D-A

Brands by name

Popular brands