HUATEC Group Corporation www.huatecgroup.com
P a g e 9 o f 3 7
4. BALANCING OPERATIONS
4.1 1-Plane Balancing
4.1.1 WITHOUT INFLUENCE COEFFICIENT:
Step 1:Setting Parameters
Press
【
On/Off
】
on the panel for a moment, the balancing page appears. Then
you can set the parameters.
Line 1 on the left: Change rotor number. T
he note displays ―
Which Rotor to
Balance
‖
(It means which rotor you will choose to Balance,HG904/HG907 contains
200 arra ys ,each arrays descri be kinds of dat a during the balancing ).
You can
press
〖
〗
or
〖
〗
to change
rotor number ,or you can input rotor number .The
method of input numbers is that you press
【
In
】
at first, t hen i nput numbers
with number ke ys , press
【
ENTE R
】
or
【 ↓ 】
at l ast t o affi rm it and the
cursor goes to the next position automatically. Press
or
key to move the
cursor between lines on the left (the following are the same).
Line 2 on the left: To set parameters,
the note displays ―
Enter Menu Key
”
,
press
【
MENU
】
to right t o set param et ers.
Line 2 on the ri ght: To choose the operation mode,
the note displays ―
How
Many Plane to Balance”
. You press
〖
〗
or
〖
〗
to choose 1 or 2(
indicating
that 1-plane balancing or 2-plane balancing is to be performed
).Here please
choose
“
1
”
.
Line 3 on the ri ght: To choose the measuring mode, there are four modes such as
ACC(acceleration),VEL(velocity),DISP(displacement) and VOL(voltage).The note
displays ―
En ter to S el ect
”
, press
〖
〗
or
〖
〗
to choose
the measuring mode
,
The displayed is the selected.
Line 4 on the ri ght: Input the weight of a trial unit. This is useful if some fixed
weight unit is used during the balancing. The method of input numbers is the same as
above.
Line 5 on the ri ght: Tell whether the influence coefficients are known. The note
displays ―
to S el ect
”
, press
〖
〗
or
〖
〗
to choose YES or