Check the VESA Pattern of Your Monitor before You Begin the Installation
Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact our
Technical Support line at 1-800-556-0533 or customer service at [email protected].
CAUTION:
Avoid potential personal injuries and property damage!
• Do not use this product for any purpose that is not explicitly specified in this manual.
Do
not exceed weight capacity. We are not liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
• This product contains a high pressure gas spring, fire and percussion prohibited. Also
it is
strictly prohibited to dismantle without professionals. Please return to the
manufacturer or hand over to professional agencies if the product is abandoned.
• The desk must be capable of supporting three times the weight of the total load (the
mount, the monitor and all accessories weight). Don't use the product on particle board.
IMPORTANT SAFETY INFORMATION
If this desk mount is NOT compatible, please contact customer service
at [email protected] to find a compatible product.
If your monitor VESA is greater than 100x100 mm/4x4 in. or less than
VESA 75x75mm/3x3in., this mount is NOT compatible.
01
Weight Restrictions
MAX:100
mm/4 in.
MAX:100
mm/4 in.
MAX:100
mm/4 in.
4.4-26.5 lbs.
(2-12 kg)
DO NOT exceed the maximum weight indicated.
This mounting system is intended for use only within
the maximum weights indicated. Use with products
heavier than the maximum weights indicated may
result in failure of the mount and its accessories,
causing possible damage or injury.
WARNING
If your monitor weighs more, this
mount is NOT compatible.
100 mm ≈ 4 in.
75 mm ≈ 3 in.
Minimum VESA pattern:
75mm/3 in.(W)x75mm/3 in.(H)
Note:
For the thin PB desks or glass table tops, you will need our
Monitor Mount Reinforcement Plate HNDA1(ASIN:
B08CK24TCX ), which provides a better way to install your
monitor mount on a desktop through C clamp installation.
If your monitor does not have any mounting hole, you will need
our Universal VESA Bracket Kit HNMUA4(ASIN:B088CWY5Q3
)(Fits most monitors within the size of 32 in.)
Summary of Contents for HNDS11
Page 14: ...13 5 3 4 6 03...
