10
4. Adjust Gas Spring Tension
Be sure to keep the arm in horizontal position
during adjustment. Or else, it would be difficult
to adjust the mount or damage the mount.
1. If the monitor can stay at the desired height by itself, no adjustment needed.
2. If the monitor rises up, press the arm to keep it in horizontal position and then
use the 13/64 in.(5mm) Alley key (F) to turn the bolt clockwise(“-” direction) to
reduce tension of the arm only until the monitor can stay at the desired height by
itself.
3. If the monitor falls down, lift the arm to keep it in horizontal position and then use
the 13/64 in.(5mm) Alley key (F) to turn the bolt counter-clockwise (“+” direction)
to increase tension of the arm only until the monitor can stay at the desired height
by itself.
F
13/64 in.
(5mm)
Large Allen Key
Summary of Contents for HNDS11
Page 14: ...13 5 3 4 6 03...
