5
CLEANING AND STERILIZATION
PROCEDURES FOR CLEANING HANDPIECE
1. Turn off the power switch.
2. Remove the insert from the handpiece.
3. Carefully wipe all surfaces of the handpiece and handpiece cord, which are contaminated by
touch, contact with instruments or other inanimate objects during dental treatment with a soft
cloth using only approved hospital grade surface disinfectants (EPA-registered, VAH / DGHM, RKI
approval or CE marked).
4. Always follow the manufacturer’s directions for disinfectant use.
5. The use of an abrasive wipe or cleaning solution will damage the surface finish of the control unit.
6. Phenols, iodophors, hypochlorite/household bleach and citric acid based disinfectants are not
recommended.
NOTICE:
The following websites provide additional information on safety and asepsis procedures:
http://www.osap.org/indec.cfm
and
http://www.cdc.gov/OralHealth/infectioncontrol/index.htm
CAUTION:
Do not sterilize the handpiece or handpiece cord.
PROCEDURES FOR HU-FRIEDY ULTRASONIC INSERTS (sold separately)
1. Clean, inspect and steam sterilize before each use.
2. For complete instructions refer to cleaning and sterilization instructions provided with the
ultrasonic insert.
SERVICE
Please send your SWERV
3
handpiece with a copy of the invoice to your dealer or an authorized
Hu-Friedy repair center. Shipping your product in its original packaging will offer the best protection
against damage during shipping. If sending directly to an authorized Hu-Friedy repair center, please
include your name and address, and the name of your dealer. Before shipment all items must be
cleaned as described in the CLEANING AND STERILIZATION section of this User Manual.
TROUBLESHOOTING
See User Manual of your SWERV
3
Control Unit for details or go to Hu-Friedy.com.
DISPOSAL AND RECYCLING
Dispose of this device and its accessories via methods approved for electronic devices and in
compliance with the Directive 2002/96/CE. At the end of their life, ultrasonic inserts should be
discarded in safety containers designed for this purpose.
Summary of Contents for SWERV3
Page 1: ...MAGNETOSTRICTIVE SCALER HANDPIECE User Manual Manuel de l utilisateur SWERV 3...
Page 2: ......
Page 11: ...11...
