Wired Controler
+7:
XK60
27
Fig.27 Installation of the Wired Controller
Brief instructions:
ķ
. Pull out the 2-core signal line from the mounting hole and pass this line
through the round hole located at the bottom of the wired controller.
ĸ
. Use M4×25 screws to fix the soleplate of the wired controller on the wall.
Ĺ
. Fix the signal line on the copper tabs X1 and X2. Make sure the line is tightly
fixed and with no short-circuit potential.
ĺ
. Set the panel and the bottom together by clasps.
4.4 How to Remove the Wired Controller
The wired controller can be easily removed as shown in Fig.28
Fig.28 Removal of the Wired Controller
5 Error Display
When error happens to the unit, the error code will be shown on the wired
controller. When multiple errors simultaneously happen, the error codes will circularly
show up.
