Ignition: Open the water outlet valve, the unit will start the exhaust device automatically and make an
ignition sound like "sizzle"; the LED will show the current temperature of the water outlet. When the
unit is running, there will be air in the gas line; therefore, a single ignition may sometimes not work.
In that case, immediately close the hot water valve and restart the unit after 10-20 seconds.
●
●
●
●
Water
outlet temperature settings: The default range of the water outlet temperature is
35
℃
~ 65
℃
.
Each time the Temperature Increase
key
is pressed, the set temperature will increase to
1
℃
, each
time the Temperature Decrease
key
is released for 2 seconds, the display will show the temperature
of the measured water outlet.
The configured water outlet temperature has a memory function. However, in case of power outage,
the memory function will be disabled.
Immediate sound function: Under normal circumstances, each time the key is pressed on the
operation panel, the buzzer will make a 0.5 second sound. When the unit fails or ends the 20 minute
timing protection, the buzzer will emit continuous alarm sounds, the combustion indicator will flash
rapidly and continuously. Press the ON / OFF key, the alarm will disappear and the screen will close,
but the power indicator will not go off (green).
Use multi-line controllers: The priority principle will apply to the use of multi-line controllers,
whichever is indicated first will take priority, while the priority controller power indicator will flash, the
remaining priority controller will also flash, the other controllers they can be displayed but will not
operate; the screen will be the one with priority. When the priority controller is turned off, the
remaining controllers screen will close.
●
4.2
Ignition and operation
NOT
E
When using for the first time or has not been used for a long time, operate as above
repeatedly, all the air in the exhaust pipe has been discharged.
18
Press the ON / OFF key on the operation panel, the LED will show the default water outlet
temperature of 4
℃
, press the / key to set the hot water outlet temperature.
●
●
Finish the above mentioned preparation and conFinish the above mentioned preparation and
confirm before using, sign before using.
●
Outlet water temperature
indication
Temperature
decrease key
Burning indication
Temperature increase key
ON / OFF key
