11
As shown in the image below, tighten the expander screws to secure them, hang the unit vertically
and screw it in with nuts, insert plastic plugs under it, and screw in the self-tapping screws.
As shown in the image below, tighten the expander screws to secure them, hang the unit vertically
and screw it in with nuts, insert plastic plugs under it, and screw in the self-tapping screws.
b. Rear upper exhaust installation mode.
2 mounting holes for plastic plug
with self-tapping screw
Tilt down to 3 °
Packing seal
Taking into account the mounting inclination of
3 °, this dimension will be determined by the
mounting position of the unit in relation to the
side wall.
90
1 mounting hole for
expander screws
3-Ф8
Ф 110 ~ Ф 120
595,3
140
3-Ф8
Ф 110 ~ Ф 120 round
hole through wall
140
48
90
595,3
1 mounting hole for
expander screw
2 mounting holes for
plastic plug with self-
tapping screw