35
LP-520 REV. 5.1.17
PART 8
–
WATER PIPING
A. GENERAL PLUMBING CONNECTION GUIDELINES
•
Pipe material must be suitable to meet local codes and industry standards.
•
The pipe must be cleaned and without blemish before any connections are made.
•
Do not apply a torch within 12” of the appliance. Doing so could damage the appliance. Such damages ARE NOT covered by
product warranty.
•
The size of the hot water pipe should be ¾” diameter and the central heating water pipe should be 1” in diameter.
•
To ease future maintenance isolation valves are recommended on both the CH and DHW loops.
•
All piping should be insulated.
Figure 23
– Operating Description – Water Flow
