HTC S710 - Smartphone - GSM, User Manual

Page: 109 / 172

Getting Connected 109
To increase security on the Wi-Fi network
The LEAP (Lightweight Extensible Authentication Protocol) feature of
Comm Manager helps increase security on your phone, and ensures that
nobody is able to access your network without your permission.
1.
On the WLAN Settings screen, select
LEAP
.
2.
Click
Menu > New
.
Note By default, the LEAP screen displays data that you entered previously.
However, you can modify or delete the data as required by clicking Menu >
Modify
or
Menu > Delete
on the LEAP screen.
3.
Enter the
SSID
(Service Set Identifier).
You can obtain this information from your wireless service provider.
4.
Enter the user name, password, and domain.
5.
Select an
Authentication Type
.
By default, the
Authentication Type
for your phone is
Open System
authentication.
Note For LEAP to work correctly, the receiving phone (your phone) must be set
with the same SSID, user name, and password as the access point.
8.4 GPRS
You can use GPRS to connect to the Internet or to send and receive MMS on
your phone. When you use GPRS, you will be billed per KB (Kilobyte) when
sending or receiving information.
Note
Check with your service provider how much it charges for its GPRS service.
If GPRS settings are not preset on your phone, obtain the
Access point
name
from your wireless service provider. Also, check with your wireless
service provider if a user name and password are required.