- 11 -
9.5 Ground voltage measurement
1) In the menu selection, select the "voltage measurement" function and press the TEST to
enter.
2) Insert the test wire into the
S
and
ES
ports at the bottom of the meter, as shown in the
figure below. Wait for the value to stabilize and read the displayed voltage value.
3) Press the TEST key to keep the data and save it, the screen displays the "
HOLD
" icon,
short press the TEST key again to cancel the hold state, the screen does not display the
"
HOLD"
icon.
4) Press the MENU key to return to the main menu.
9.6 AC current measurement
1) In the menu selection, select the "current measurement" function, press the TEST key to
enter.
2) Open the clamp head and clamp the wire under test. Wait for the value to stabilize and
read the displayed current value.
3) Short press the TEST key to keep the data and save it, the screen displays the
"HOLD"
icon, short press the TEST key again to cancel the hold state, the screen does not display
the
"HOLD"
icon.
4) Press the MENU key to return to the main menu.
9.7 Selection method
1) In the menu selection, select the
"selection method"
function and press the
TESTkey to enter.
2) Insert the test wire into the bottom port of the meter according to the color, as shown
in the figure below. Then open the clamp head and clamp into the resistance circuit. Wait
for the value to stabilize and read the displayed current value.
Fig. 8.4-2 Schematic diagram of four-wire measurement wiring
Fig. 8.4-2 Schematic diagram of three-wire measurement wiring
Summary of Contents for CE-8201
Page 1: ...MANUAL CE 8201...