THT45W-THT46
EN - 30
5.7.1 Displaying an image on the PC in real time
The instrument allows displaying on the PC in real time the image shown on the display.
To carry out this operation, proceed as follows:
1. Connect the USB cable to the instrument (see Fig. 3 – Part 16) and to the PC. The
following screen (see Fig. 36 – Left side) is shown on the display:
Fig. 36: Displaying an image on the PC in real time
2. Use the keys
or
to select the option “PC Camera” and press the “Select” key.
The screen Fig. 36 – Right side is shown on the display.
3. Inside “
My Computer
”, search for the “USB video device” which is automatically
recognized by the PC and allows displaying the (IR or visual) image on the instrument’s
display in real time.
4. Disconnect the USB cable to go back to the instrument’s main screen.
5.8 HDMI VIDEO OUTPUT
The video output available in the instrument (see Fig. 2 – Part 18) enables displaying the
IR image acquired on an external monitor/device capable of managing HDMI systems. To
connect the instrument, proceed as follows:
1. Switch on the instrument.
2. Connect the instrument to the external monitor/device using the HDMI video cable
provided.
3. Turn on the external monitor or device.
4. Check for the presence of the IR image both on the instrument's display and on the
monitor or external device with contemporary management of the operations.
5. Detect/monitor the image on the external monitor or device.
6. At the end of the operations, switch off the monitor or external device and disconnect
the HDMI video cable from the instrument.
