![background image](http://html1.mh-extra.com/html/ht/pvcheck/pvcheck_manual_2178157055.webp)
PVCHECK
53
The previous relationships are valid if
Irradiance > Min Irradiance
(see the User Manual of the
MASTER instrument) and the irradiance values are “
steady
”, i.e. for each sample taken,
with IP
≤
1min
,
the difference between the maximum and minimum irradiance values measured
must be < 20W/m
2
The final OUTCOME can be:
Non-displayable
: if the obtained values are inconsistent (e.g. nDC >1.15) or if irradiation has
never reached a
steady
value > minimum threshold set.
The maximum performance of the
system
The highest performance (maximum value of nDC) is detected according with previous relationships
12. SERVICE
12.1. WARRANTY CONDITIONS
This instrument is warranted against any material or manufacturing defect, in compliance with the
general sales conditions. During the warranty period, defective parts may be replaced. However,
the manufacturer reserves the right to repair or replace the product.
Should the instrument be returned to the After-sales Service or to a Dealer, transport will be at the
Customer’s charge. However, shipment will be agreed in advance. A report will always be enclosed
to a shipment, stating the reasons for the pro
duct’s return. Only use original packaging for shipment;
any damage due to the use of non-original packaging material will be charged to the Customer.
The manufacturer declines any responsibility for injury to people or damage to property.
The warranty shall not apply in the following cases:
• Repair and/or replacement of accessories and battery (not covered by warranty).
• Repairs that may become necessary as a consequence of an incorrect use of the instrument or
due to its use together with non-compatible appliances.
• Repairs that may become necessary as a consequence of improper packaging.
• Repairs which may become necessary as a consequence of interventions performed by
unauthorized personnel.
• Modifications to the instrument performed without the manufacturer’s explicit authorization.
• Use not provided for in the instrument’s specifications or in the instruction manual.
The content of this manual cannot be reproduced in any form without the manufacturer’s
authorization.
Our products are patented and our trademarks are registered. The manufacturer reserves
the right to make changes in the specifications and prices if this is due to improvements in
technology
12.2. SERVICE
If the instrument does not operate properly, before contacting the After-sales Service, please check
the conditions of battery and cables and replace them, if necessary. Should the instrument still
operate improperly, check that the product is operated according to the instructions given in this
manual.
Should the instrument be returned to the After-sales Service or to a Dealer, transport will be at the
Customer’s charge. However, shipment will be agreed in advance. A report will always be enclosed
to a
shipment, stating the reasons for the product’s return. Only use original packaging for shipment;
any damage due to the use of non-original packaging material will be charged to the Customer.
Summary of Contents for PVCHECK
Page 1: ...Manual PVCHECK EAN 8033772797467...
Page 2: ...PVCHECK 2 PVCHECK...
Page 56: ...v 181002 2018 10 02 11 20...