![background image](http://html1.mh-extra.com/html/ht/pvcheck/pvcheck_manual_2178157005.webp)
PVCHECK
3
1. PRECAUTIONS AND SAFETY MEASURES
The instrument has been designed in compliance with directive IEC/EN61010-1 relevant to
electronic measuring instruments. Before and while carrying out measurements, observe the
following indications and read all notes preceded by the symbol
with the utmost attention.
Do not carry out any voltage or current measurement in humid environments
Do not carry out any measurements in case gas, explosive materials or flammables are present,
or in dusty environments
Avoid contact with the circuit being measured if no measurements are being carried out.
Avoid contact with exposed metal parts, with unused measuring probes, etc.
Do not carry out any measurement in case you find anomalies in the instrument such as
deformation, breaks, absence of display on the screen, etc.
Pay special attention when measuring voltages higher than 25V in special environments and
50V in normal environments, since a risk of electrical shock exists.
In this manual, and on the instrument, the following symbols are used:
CAUTION: observe the instructions given in this manual; an improper use
could damage the instrument or its components
High voltage danger: electrical shock hazard
Double insulation
DC voltage or current
Connection to earth
1.1.
PRELIMINARY INSTRUCTIONS
This instrument has been designed for use in the environmental conditions specified in § 10.6.
Do not use in different environmental conditions.
The instrument may be used for measuring
VOLTAGE
and
CURRENT
in CAT III 300V with a
maximum voltage of 1000VDC between inputs. Do not use on systems exceeding the limit
values specified in § 10.1, § 10.2 and § 10.3
We recommend following the normal safety rules devised to protect the user against dangerous
currents and the instrument against incorrect use.
Only the accessories provided together with the instrument will guarantee safety standards.
They must be in good conditions and replaced with identical models, when necessary.
Check that the batteries are correctly inserted.
Before connecting the measuring cables to the circuit being measured, check that the desired
function has been selected.
Summary of Contents for PVCHECK
Page 1: ...Manual PVCHECK EAN 8033772797467...
Page 2: ...PVCHECK 2 PVCHECK...
Page 56: ...v 181002 2018 10 02 11 20...