![background image](http://html1.mh-extra.com/html/ht/f3000u/f3000u_user-manual_2178131012.webp)
NEPTUNE
EN - 10
4.2.10. Setting the full scale for flexible clamp transducer
The instrument can be used with a flexible clamp transducer (optional accessory). For a
correct current measurement, it is
necessary
to set the full scale of voltage for the clamp
in use (please refer to the transducer
’
s user manual for the correct full scale value to be
set). Proceed as follows:
1. Switch off the instrument (
OFF
)
2. Press and hold key
MODE/MXMNPK
and switch on the instrument by turning the
rotary switch. The following screen appears on the display:
Fig. 5: Setting the full scale for flexible clamp transducer
3. Press keys
/
or
to set the full scale value of the clamp in use among the options:
3VAC
(model F3000U) or
1VAC
(other models).
4. Press key
GO/HOLD
to confirm and go back to measuring screen.
5. Settings are maintained very time the instrument is switched on.