UTL291
Digital Clamp-on Meter
Instruction Manual
English
1
yr.
warranty
IEC61010-1
P R O F E S S I O N A L V A L U E
10078 08/14
ELECTRICAL SPECIFICATIONS
DC VOLTAGE
Range
Resolution Accuracy
600mV
0.1mV
± (0.8% + 2 dgts)
6V
1mV
60V
10mV
600V
1V ± (1.0% + 2 dgts)
Overload protection:
600V RMS
AC VOLTAGE
Range
Resolution Accuracy
600mV
100mV ± (1.0% + 10 dgts)
6V
60V
600V
1V ± (1.2% + 10 dgts)
Overload protection:
600V RMS
Frequency Range:
50Hz ~ 60Hz
AC CURRENT
Range
Resolution Accuracy
6A
0.001A
± (2.5% + 10 dgts)
60A
0.01A
600A
0.1A
Frequency Range:
50Hz ~ 60Hz
RESISTANCE
Range
Resolution Accuracy
600Ω
0.1Ω
± (1.2% + 2 dgts)
6kΩ
1Ω
60kΩ
10Ω
600kΩ
100Ω
6MΩ
1kΩ
60MΩ
10kΩ ± (2.0% + 2 dgts)
Overload protection: 25
0V RMS
DIODE
Range
Test Current Open Test Circuit
0.5 to 0.7V
1.2mA 2.7V
Overload protection: 25
0V RMS
DUTY CYCLE
Range
Resolution Accuracy
0.5 to 99%
0.10% ± (1.5% + 15 dgts)
CONTINUITY
Audible
Threshold
Open Test
Circuit
Resolution
≤ 50Ω
1.0V
0.1Ω
Overload protection:
250V RMS
FREQUENCY
Range
Resolution Accuracy
9.99Hz
0.001Hz
± (0.5% + 5 dgts)
99.99Hz
0.01Hz
999.9Hz
0.1Hz
9.999kHz
0.001kHz
99.99kHz
0.01kHz
999.9kHz
0.1kHz
9.999MHz
0.001MHz
Overload protection: 25
0V RMS
CAPACITANCE
Range
Resolution Accuracy
10nF
0.001nF
± (3.0% + 10 dgts)
100nF
0.01nF
1μF
0.1nF
10μF
0.001μF
100μF
0.01μF
1mF
0.1μF
10mF
0.001mF
± (4.0% + 10 dgts)
60mF
0.01mF
Overload protection:
250V RMS
TEMPERATURE
Range
Resolution Accuracy
-20˚C to 1000˚C 1˚C
± (2.0% + 2 dgts)
-4˚F to 1832˚F 1˚F
± (2.0% + 4 dgts)
GENERAL SPECIFICATIONS
▶
Display: LCD 3-5/6 Digits 6000 count
▶
Refresh Rate: 3 times/sec
▶
Overrange display: “OL”
▶
Power battery: DC1.5V x3 SIZE AAA.
▶
Battery Life: Approx. 100 hours
▶
Clamp jaw opening: 1.02in (26mm)
▶
Operating Elevation Up to 6571.7 ft. (2000m)
▶
Operating Temperature: 32°F to 104°F (0°C to 40°C) at < 75% R.H
▶
Storage Temperature: 14°F to 140°F (-20°C to 60°C) at < 80% R.H
▶
Accuracy Temperature: Stated Accuracy at 73°F ± 41°F (23°C to ± 5°C) < 75% R.H
▶
Dimensions: 8.66x3.19x1.6in (220x81x41mm)
▶
Weight: about 0.70lbs. (318g) (battery installed)
▶
Certifications: CE, C-ETL-US
▶
Standards: IEC61010-1, IEC61010-2-032, Double Insulated
▶
Operating Category: 600V CAT III
▶
Pollution degree: 2.
BUTTON OPERATION
Non-Contact Voltage Detection
key, is used to detect power with a sensor located at the
tip of the clamp head and indicates positive response with an audible alarm and visual LED
indicator light just above the “NCV” button. See reverse side for instructions.
Selection
key, switches measurement functions that share a selector position. By pressing
“SEL” key to toggle between AC and DC Volts, Diode, Continuity, Capacitance and Resistance.
Range
key, press “RAN” key; to toggle between Automatic Ranging and Manual Ranging.
“Auto” icon will show on the display. Press and hold “RAN” to return to Auto Ranging.
Hz%
Frequency / Duty Ratio
selection key. Pressing this key can select Voltage / Frequency / Duty
Ratio or Current / Frequency / Duty Ratio pending selector position.
Hold
key, press “HOLD” key; the reading will be locked and “HOLD” icon will display on
display. Press “HOLD” key again to release.
Backlight
key: Press and hold “Backlight” key for 2 seconds to turn on. Press and Hold again
to turn off. The Worklight only turns on with the Backlight in AC Current mode.
COM
UTL291
TEMP
AUTO
µmVA
OFF
6/60
AC CLAMP METER
INPUT
RAN
Hz%
HOLD
A
Hz%
600
A
V
SEL
NCV
MAX
°C °F
kMΩ
Ω
UTL Universal Trade Line
800-547-5740
www.utltest.net
Copyright © 2014 UTL. All Rights Reserved
WARRANTY
The UTL Digital Clamp-on Meter (UTL291) is warranted to be free from defects in materials and
workmanship for a period of one year from the date of purchase. This warranty does not cover fuses,
disposable batteries, or damage from drops, neglect, misuse, alteration, contamination, or abnormal
conditions of operation or handling. Resellers are not authorized to extend any other warranty on behalf
of UTL. To obtain service during the warranty period, contact your nearest UTL service center directly. For
full warranty details visit us online
www.utltest.net.
ELECTRIC SYMBOLS & METER ICONS
Important safety information
Ground wire
Danger High Voltage
Protected for High Voltage
AC (Alternating Current)
Double insulation protection
DC (Direct Current)
Complies with EU Regulations
AC or DC
Auto Ranging
Negative Polarity
Low Battery
Resistance
Data Hold
Diode
Backlight
Continuity
Overload: Range Exceeded
Micro 10-6
Kilo 103
Milli 10-3
Mega 106
99 Washington Street
Melrose, MA 02176
Phone
781-665-
1400
Toll Free 1-800-517-8431
