background image

  

F3000 

 

 

 

 

EN - 12

7. SERVICE 

7.1. WARRANTY  CONDITIONS 

This instrument is warranted against any material or manufacturing defect, in compliance 
with the general sales conditions. During the warranty period, defective parts may be 
replaced. However, the manufacturer reserves the right to repair or replace the product. 
 
The manufacturer declines any responsibility for injury to people or damage to property. 
 
The warranty shall not apply in the following cases: 
 

  Repair and/or replacement of accessories and battery (not covered by warranty). 

  Repairs that may become necessary as a consequence of an incorrect use of the 

instrument or due to its use together with non-compatible appliances. 

  Repairs that may become necessary as a consequence of improper packaging. 

  Repairs which may become necessary as a consequence of interventions performed 

by unauthorized personnel. 

  Modifications to the instrument performed without the manufacturer’s explicit 

authorization. 

  Use not provided for in the instrument’s specifications or in the instruction manual. 

 
The content of this manual cannot be reproduced in any form without the manufacturer’s 
authorization. 
 

Our products are patented and our trademarks are registered. The manufacturer 
reserves the right to make changes in the specifications and prices if this is due to 
improvements in technology 

 

7.2. SERVICE 

If the instrument does not operate properly, before contacting the After-sales Service, 
please check the conditions of batteries and replace them, if necessary. Should the 
instrument still operate improperly, check that the product is operated according to the 
instructions given in this manual. 
 
Should the instrument be returned to the After-sales Service or to a Dealer, transport will 
be at the Customer’s charge. However, shipment will be agreed in advance. A report will 
always be enclosed to a shipment, stating the reasons for the product’s return. Only use 
original packaging for shipment; any damage due to the use of non-original packaging 
material will be charged to the Customer. 
 

Summary of Contents for F3000














Reviews: