F3000
EN - 6
4.1.2. Opening/closing flexible clamp jaw
CAUTION
Put the conductor as close as possible to the middle of the jaws in order
to meet the meter accuracy specifications (see Fig. 2)
When apply/remove the instrument on/from live conductors, if is not
possible to de-energize the circuit on test,
use appropriate security
measures (e.g. protective gloves)
to avoid dangerous electric shock for
the operator and a possible damage of the instrument
Disconnect the main voltage or wear protective gloves before performing
measurement
Put the hand below the LCD display during the measurement as indicated
by the arrow in Fig. 2
For opening/closing the flexible clamp jaw following the below steps:
1. Rotate of a quarter in the counterclockwise direction the fixing jaw connector to unlock
the jaw (see Fig. 2)
2. Extract the flexible jaw and wrap around the conductor on test
3. Replace the jaw in the seat and rotate of a quarter in the clockwise direction the fixed
jaw connector up to align the two arrows on the plastic case to lock the jaw (see Fig. 2)
Fig. 2: Opening/closing flexible clamp jaw
