background image

   HT4000 

 

 

 

 

EN - 3

2. GENERAL DESCRIPTION 

The HT4000 meter can perform the following measurements: 
 

  Air speed measurement with 30 mm diameter external probe 

  Airflow measurement in m

3

/min (CMM) and ft

3

/min (CFM) 

  Air temperature measurement in °C/°F with external probe 

  Relative humidity measurement %RH with external probe 

 Atmospheric 

pressure 

measurement with internal sensor 

  Maximum, minimum and average (AVG) values 

 Data 

HOLD 

  Internal memory with  99 locations for measurement storing 

 Back 

light 

  Auto power OFF 

 
Each function could be selected via the relative key. The selected quantity appears on a 
high-contrast liquid crystal display with indication of measurement unit and of the active 
functions. There are also the function keys, for their use please see § 4.3. 
 
 

3.  PREPARATION FOR USE 

3.1. INITIAL 

The instrument has been checked from every point of view before shipment. Every care 
has been taken to make sure that the instrument reaches you in perfect conditions. 
 
However, it’s advisable to make a rapid check in order to detect eventual damages, which 
may have occurred in transit. Should this be the case, enter immediately the usual claims 
with the carrier. 
 
Make sure that all the accessories listed in § 6.3 are contained in the package. In case of 
discrepancies contact the dealer. 
 
In case of returning of the tester, please keep to the instructions given in § 7. 
 

3.2. POWER 

SUPPLY 

The instrument is battery supplied by 1 battery 9V type 9V NEDA 1604 IEC 6F22 JIS 006P 
included in the package. Battery life: about 100 hours. When battery is low, the symbol 
"

" appears on the display. Replace it immediately, following the instructions given in § 

5.2. 
 

3.3. CALIBRATION 

The instrument complies with the technical features listed in this manual. Its performances 
are guaranteed for one year. 
 

3.4. STORAGE 

In order to guarantee the accuracy of the measurements, after a period of storage in 
extreme environmental condition, wait for the necessary time so that the instrument 
returns to normal measuring conditions (see § 6.2.1). 

Summary of Contents for 4000
















Reviews: