background image

   HT4000 

 

 

 

 

EN - 7

4.4. PRELIMINARY 

OPERATIONS 

4.4.1. Activation of display backlight 

Just press the key 

/ SET

 to activate or deactivate display backlight which shuts off 

automatically after approx. 30s.  
To activate or deactivate the function of display auto power off operate as follows: 
 
1.  Press and hold the key 

/ SET

 to enter the setting mode. 

2.  Use the arrow keys 

S

 or 

T

 to select “

bLiGHt

” 

3.  Press the key 

 / UNIT

 to set the display AutoOff” 

4.  Use the arrow keys 

S

 or 

T

 to able “

on

” or disable “

off

” the function 

5.  Press the key 

 / UNIT

 to confirm the function and quit the mode 

 

4.4.2.  Change of measuring unit 

The instrument permits to change the measuring unit on both main display and secondary 
display (when measuring press the arrow keys 

S

 or 

T

 to go from one display to the 

other). Act as follows: 
 
1.  Press and hold the key 

 / UNIT

. The measuring unit flashes on main display. 

2.  Press again and hold the key 

 / UNIT

. The measuring unit flashes on secondary 

display. 

3.  Use the arrow keys 

S

 or 

T

 to select the measuring units: 

m/s, mph, kph, Beaufort, 

kts, fpm

 on main display or the measuring units: 

°C, °F

 (with external probe connected 

with the instrument) and 

hPa, mmHg, in Hg

  on secondary display (with external probe 

not connected with the instrument) 

4.  Press the key 

 / UNIT

 to confirm selection and quit the mode 

Summary of Contents for 4000
















Reviews: