Page 14
The buttons on the bus manual control panel can work only when the Bus Manual Control
Enabled/Disabled indicator is lit. When a key is pressed before it is set, the Request indicator will not be
lit; and when a key is set and pressed in order, the Request indicator will be lit and send a control signal
to the corresponding model. As long as there is feedback from the corresponding module when a key is
set, the Answer indicator will be lit, no matter whether or not the Bus Manual Control Enabled/Disabled
indicator is lit.
Note: After the setup is finished, press the # key to save, or the * key to go back to the previous
menu.
§2-6 History Record
Move the cursor to the
Record
option and press the
#
key. After that, the following content will be
displayed.
When the cursor is now at the
Fire alarm
option, the user may query the history of fire alarms by
pressing the
#
key. The user may move the cursor through
▲ ▼ ◀
or
▶
and press the
#
key to
query or delete the option where the cursor is. The system can record at most 999 pieces of information
for each kind of history. When there is a new piece of information after there have been 999 pieces
already, the earliest piece of information will be deleted automatically.
§2-7 Password setup
Move the cursor to the
Password
option and press the
#
key. After that, the following content will be
displayed.
Summary of Contents for Addressable fire alarm MN-300
Page 1: ...Fire Alarm Control Panel Linkage Type ...
Page 13: ...Page 11 Air out fan Air out Valve Valve ...
Page 26: ......
