manualshive.com logo in svg

HSM SP 5080, Operating Manual, Page: 48 / 57

Share
Download
HSM SP 5080 Operating Manual Download Page 48

48  

 

2.990.999.120_en

 04/2013

SP 5080

– Run the press ram forwards and backwards several times and, whilst the press ram is
   as far forward as possible, recheck the oil level 
– Fill more oil if required
– Screw on a new venting fi lter
– Mount the cover (H) onto the unit again

Note
Observe the applicable accident prevention regulations when handling
cleaning agents and solvents.

Observe the environment protection regulations when disposing of waste
oil.

Never mix hydraulic fl uid and cleaning agent mixtures with waste oil.
Collect these substances in separate containers and dispose of them
according to the regulations.

ÖL

OIL

HUILE

OLIO

ACEITE

ÓLEO

OLIE

OLJA

ÖLJY

5.2.2 

Lubricating the movable parts

The press ram guide (black plastic blocks) is maintenance free.
Do not lubricate the tracks in the press chamber!

– 

Should any grinding or humming noises arise, place a drop of biodegradable

 

lubricating oil on the exposed tracks of the press chamber fl oor.

– 

Replace the plastic blocks of the press ram guide every 2 years. 

– 

Consult HSM customer service in this regard.

– Lubricate all movable parts and hinges as required, especially the door hinges and the bear-

ings of the door locks with multi-purpose grease or universal lubricating oil.

Summary of Contents for SP 5080


























































Reviews:

No comments