manualshive.com logo in svg

HSM SP 5080, Operating Manual, Page: 45 / 57

Share
Download
HSM SP 5080 Operating Manual Download Page 45

04/2013 

2.990.999.120_en

 

  

45

SP 5080

4.7.4 

Oil reservoir empty

• 

“Oil reservoir empty” display lights up blue.

- Refi  ll the the cutting block special oil.
 

Order no. 1.235.997.500 for a 5 l container

• 

After the reservoir is fi lled, the “Oil reservoir empty” signal is automatically

 deactivated.

Note 
The shredder remains operational even when the oil reservoir is empty.

4.8  

Stopping the machine

- 

Run the machine into the initial position (with the press ram at the rear).

- 

Switch off the main switch of the shredder and of the press

-  

Secure the main switches against restarting

-  

Unplug the red CEE power plug

4.9  

Outdoor use

Warning!

For reasons of safety, only operate under supervision. The operator

must ensure that unauthorized persons do not have access to the ma-
chine.

When the machine is not being used, it must be shut down and

secured against unauthorised use.

See also the “Siting the machine” section

Summary of Contents for SP 5080


























































Reviews:

No comments