manualshive.com logo in svg

HSM SP 5080, Operating Manual, Page: 33 / 57

Share
Download
HSM SP 5080 Operating Manual Download Page 33

04/2013 

2.990.999.120_en

 

  

33

SP 5080

4.1.6 

To set the user language

The text display can be set to different user languages.
The options available are: 
D - GB - F - E - I - P - NL - (N - S - FIN - DK - GR - TR - PL - CZ - RUS

– 

Press the +/– keys simultaneously for about 3 seconds

 

Indicator: Service menu – Set-up mode

– 

Press the + key 

4x

 

Indicator: Service menu – User language 

– 

Press the +/– keys simultaneously for about 3 seconds

 

Indicator: User language – GB

– 

Use the +/– keys to scroll to the required menu item

– 

Press the +/– keys simultaneously to confi rm

 

Indicator: Manual mode – Initial position

4.1.7 

To display the error memory

For diagnostic purposes, the most recent error is stored in the error memory. For error
numbers, see the section 

“Malfunctions”

– 

Press the +/– keys simultaneously for about 3 seconds

 

Indicator: Service menu – Set-up mode

– 

Press the + key 

5x

 

Indicator: Service menu – Error memory

– 

Press the +/– keys simultaneously for about 3 seconds

 

Indicator: Error memory

 

 

      xxxx

4.1.8 System

This menu item is only available to HSM service technicians.

Summary of Contents for SP 5080


























































Reviews:

No comments