manualshive.com logo in svg

HSM FP 1500, Operating Instructions Manual, Page: 6 / 56

Share
Download
HSM FP 1500 Operating Instructions Manual Download Page 6

Introduction

FP 1500

FP 3000

6.817.999.520

Edition 03/2000

1 - 2

1.2

Nameplate and machine number

The machine number is specified on the nameplate of the barrel press, shown above.
Guarantee claims and inquires cannot be processed if you do not quote the machine
number.

Please therefore enter this number in the grey field on the nameplate immediately
after receipt of the barrel press.

1.3

Copyright

We own the copyright to this Operating Manual. It is issued only to purchasers of our
machines.

Without our permission, these documents may neither be reproduced nor issued to
third parties, in particular to competitors. This applies also to extracts from this
documentation.

HSM-Pressen GmbH+CoKG

HSM-Pressen

 GmbH+CoKG

Postfach 1163

Postfach

 1163

D-88 678  Salem

D-88

 678  Salem

West  Germany 

West

  Germany 

MODELL

MASCH.-NR.:
  

PRESSKRAFT:                             kN

SPANNUNG:                   V           Hz

BAUJAHR:

           LEISTUNG:

               kW

           NENNSTROM:

             A

Summary of Contents for FP 1500

























































Reviews:

No comments