manualshive.com logo in svg

HSM FP 1500, Operating Instructions Manual, Page: 15 / 56

Share
Download
HSM FP 1500 Operating Instructions Manual Download Page 15

FP 1500

 Description

FP 3000

Edition 03/2000

6.817.999.520

 3 - 1

3

Description

3.1

Short description of barrel presses

The barrel press FP 1500 is intended only for compacting empty light sheet metal
barrels as well as any other materials specified in the contract.

The barrel press FP 3000 is intended only for compacting empty light sheet metal
barrels and empty rolling hoop drums as well as any other materials specified in
the contract.

Consult the customer service of HSM  if you plan to use the barrel press outside its
contractually agreed and intended scope of application.

Technical characteristics • short cycles

• usable indoor and outdoor

• collecting basin for residual liquid

• electro-hydraulic drive

• membrane keypad with LED-display

• automatic return stroke

• press ram on roller bearings

• press ram with spikes for barrel opening

• piston rod hard-chrome plated

• almost maintenance free

• enclosed construction with inspection window

• welded frame

Summary of Contents for FP 1500

























































Reviews:

No comments