manualshive.com logo in svg

HSM FP 1500, Operating Instructions Manual, Page: 41 / 56

Share
Download
HSM FP 1500 Operating Instructions Manual Download Page 41

FP 1500

 Replacing

FP 3000

components

Edition 03/2000

6.817.999.520

 9 - 1

9

Replacing components

Safety information

The valid accident prevention regulationsVBG 4, 5 and 15 as well as DIN
VDE 0105 Part 1 must be complied with when performing repairs.

Install all protective devices and check their effectiveness before putting
the baling press into operation.

Electrical voltage

Repair barrel press only when the main switch is switched off. Malfunctions
of the electrical system or the feed cables may only be repaired by
qualified electricians or the HSM customer service.

Qualified personnel

We recommend to have repairs of the barrel press made by trained HSM
personnel. We assume no liability for damage caused by incorrect
repair.

Operational safety

Unauthorized modifications of components or changes of the set
electrical and hydraulic values are not allowed and can cause severe
damage to the barrel press.

Please send your order for spare parts to:

HSM - Pressen GmbH + Co.KG
Bahnhofstraße 115
88682 Salem, Germany
Tel. ++49 (0) 75 53/822-0
Fax ++49 (0) 75 53/ 82 21 60
e-mail: [email protected]

Summary of Contents for FP 1500

























































Reviews:

No comments