HSB Beta 110-ZSE, Original Assembly And Maintenance Instructions, Page: 7 / 28

distributed by
Safety
FM 239 MuW Beta-Typ-Z Rev.01 2018-06-19
5
Equipment

DIN EN 60 204-1:2006: Electrical equipment of machines

2004/108/EC: EMC Directive

German Electromagnetic Compatibility Act (EMVG): Law on the
electromagnetic compatibility of equipment from 26/02/2008 (BGBI
I/Federal Law Gazette p. 220)
1.7
Changes to the linear unit
Rebuilding and
modifying There are to be no changes, either structural or safety-related, carried
out on the linear unit without the prior written agreement of HSB. We
accept no liability for any unauthorised changes carried out on the unit.
The operator may only carry out the maintenance and repair work
specified in these Operating Instructions. Any further work involving the
replacement of wearing or substitute parts may only be carried out
following consultation with our service technicians and by the service
technicians themselves or by HSB.
Never remove or decommission any safety or protection devices.
Follow the assembly instructions supplied by the manufacturer when
using special attachment parts!
1.8
Requirements for personnel
The linear unit is manufactured using state-of-the-art technology and in
compliance with the recognised safety standards. However, there are
still risks associated with its use. Therefore, only qualified and trained
personnel are permitted to assemble and operate the unit.
Any person involved in the assembly, operation, maintenance, repair or
disassembly of a linear unit must have read and understood these
instructions, in particular the first section entitled "Safety".
Any work involving live parts may only be carried out by trained
electricians. This work involves, for example:

installation of safety limit switches,

attachment of a drive,

checking the drive rotation direction.
1.9
Responsibilities of the operator
Instruction of
personnel In accordance with the EU directive 89/655/EEC Art. 6(1) and 7 on the
safe use of work equipment, as well as the EU basic directive
89/391/EEC Art. 1(1) and Art. 6(1), the operator is obliged to provide
any person involved in the installation, operation, maintenance, repair