distributed by
Maintenance
FM 239 MuW Beta-Typ-Z Rev.01
2018-06-19
23
Lubrication points
for standard linear
units
Fig. 8: Lubricating hole on the carriage
In order to relubricate the linear guide system, there is a lubricating
hole on the carriage which must be supplied with grease using the part
built onto the carriage. For this purpose, there is a recess in the
lubricating hole in which an appropriate O-ring (1) is inserted as a seal.
Lubrication points
for linear units with
optional carriage
plate
Fig. 9: Lubrication point (1) on the carriage on both sides
The linear guide system can be relubricated at one of the two
lubrication points (1).
Lubrication method
Lubrication should take place as far as possible while in motion
so that the grease is distributed and no pressure builds up.
Summary of Contents for Beta 110-ZSE
Page 2: ......