Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 21 -
3.4.0. SOFTWARE
• Special HST frequency modulation impulse charging process
®
(absolutely no memory effect due to variable frequency-modulated
impulse charging current with a high amplitude)
• Self diagnostic
(test of the internal power circuit)
• Polarity reversal protection
(power is disconnected from the charging box, accompanied by a
signal and a red blinking LED, disconnect charging box - battery)
• Special charge mode for Ni-Cd batteries
(for deep discharging or dormant batteries)
• No voltage change required
(battery voltage is detected automatically)
• Charging at battery temperatures exceeding 40° C
(by generating gradients using dynamic temperature evaluation)
• Automatic evaluation of the temperature contacts
(with NTC contact, a dynamic temperature evaluation is performed,
this depends on the battery adapter.)
• Defective cell detection
(red blinking LED = battery is defective or battery no longer has full
capacity)
• Status indication via LED
(red = charging / green = full)
• Charging effectiveness higher than 95%
• Fan control
• New, capacity-related charge retention mode for Ni-Cd and Ni-MH
(prevents the charging capacities in the battery pack from drifting
apart)
• Suitable for Li-Ion batteries
• 3.6 V - 50.4 V (43.2V nominal voltage)
