HIROSE ELECTRIC CO.,LTD.
ETAD-T0940-00
0
12
/
48
FORM HC0011-9-2
△
6.2
CONNECTOR ASSEMBLY INSTRUCTIONS
1 - Insert contact and push until a click is heard.
Please take care to ensure that the terminal is inserted in the correct orientation.
Note 1: Holding the cable, please insert straight into the housing. Do not use more than 10N
of force during this process.
Note 2: If the crimped terminal does not enter the housing smoothly the first time, remove it
and then re-insert.
Upper and lower crimping portions
are inward during insertion
OK
NOT OK
Crimping portions are facing outward
Mar.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
