HIROSE ELECTRIC CO.,LTD.
ETAD-T0947-00
0
24
/
32
FORM HC0011-9-2
△
9.
MATING OPERATING PROCESS
1
– Prepare a panel with a male connector attached and a female connector harness
product.
Make sure that the male and female connector key codings are the same.
Align the locking direction of the male and female connectors and insert them straight along
the mating direction.
2
– Please insert the connectors until they butt against each other. The connector will be
locked.
Do not touch the female connector lock lever when inserting the connector.
This makes it difficult to recognize the lock feeling and may cause half insertion.
Lock convexity
Male connector
Female connector
Lock lever
Feb.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
