HIROSE ELECTRIC CO.,LTD.
ETAD-T0947-00
0
19
/
32
FORM HC0011-9-2
△
Set condition of retainer
After setting the retainer,
please make sure the retainer is not inclined as seen from the front.
*Set condition of retainer
*One side of the retainer not installed.
(Even in the case of this left-right reversal.)
OK
NG
In case of cavities where terminals are not inserted, please use plugs to ensure
waterproofness of connectors.
Below dimension should be respected to ensure correct position of plugs:
Feb.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.