Step 2.
The Primary Support with threaded inserts will be the bottom of the
stand. (Take notice that each of the Primary Supports has two shallow grooves on
one side, these grooves are to indicate the front of the RXR Audio Stand. As the
stand is assembled every Primary Support should have these grooves facing the
same direction.) Attach the bottom Primary Support just as in Step 1. The Side
Rail will sit about
¼
” up from the bottom of the Primary Support. (See Picture 3.)
Picture 3
Step 3.
Once the top and bottom Primary Supports are in place, it is time to
place the rest of the Primary Supports that go between them. Picture 4 shows the
stand with the top and bottom Primary Supports attached to the Side Rail.
Picture 4
