base size. The RXR-1921 uses the 1921 size isolation bases. The RXR-1719 uses
the 1719 size isolation bases.
Match the load range of each isolation base with the component weight.
Matching the isolation base to the proper component weight will ensure optimum
performance. The load range can be changed for a nominal factory fee. If you do
not have the correct load range for a component, please contact Harmonic
Resolution Systems, Inc. or your local certified retail location to arrange to have
this corrected.
Load the HRS Isolation Bases into the RXR Frame with the HRS logo facing the
front of the rack system. Be sure that the isolation base (shelf) foot is located
securely in the pocket of the RXR Frame Primary Support. This will
automatically occur when the front and back edge of the isolation base is in line
with the front and back face of the frame. If the front and back edges do not line
up with the front and back of the frame structure, contact Harmonic Resolution
Systems, Inc. or your certified retail location because you do not have the proper
size isolation base or frame. Use the twin shallow bodylines on the front of the
RXR Primary Support Structure to locate the isolation bases from left to right in
the frame. The widths of the shallow bodylines are the same as the standard
isolation base that is designed for use with the frame. When the left and right
edge of the isolation base is lined up with the ends of the shallow bodylines in the
frame then the isolation base is in the center of the frame.
Loading Components into RXR Frame
- Carefully load each component into the
RXR Audio Stand. Be careful not to hit the front edge of the isolation base
because you will scratch the frame. Once all the components are loaded, you
should check to see that none of the isolation bases are overloaded. By placing
one or two fingers on the bottom of the Primary Support and your thumb on the
top of the isolation base, you should be able to move the top of the isolation base
slightly (at all four corners) when you squeeze your finger(s) together. If there is
no compliance, remove the isolation base and component to verify the load range
of the isolation base is correctly matched with the component. The load range of
the isolation base is identified by a colored sticker on the back of the isolation
base (see the HRS Isolation Base manual for instructions). Please consult with
your authorized Harmonic Resolution Systems, Inc. dealer or contact Harmonic
Resolution Systems, Inc. if you need assistance. The HRS Isolation Base load
range can be easily modified at any time by sending it to Harmonic Resolution
Systems, Inc. or an authorized dealer to have the primary isolation stage rebuilt.
