2-Channel HDMI Splitter
5
2.0 Features
•
Supports PC & HDTV resolutions, VGA-to-UXGA and 480p-to-UHD
•
LED indicators for Power, Source Video and Output Connections
•
Includes brackets for surface mounting
•
Extracts HDMI Audio and outputs it as L/R Analog and TOSLINK
•
Supports LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio
•
Plug and play installation with Smart EDID Management
•
Bandwidth of 10.2 Gbps for a sharp digital image
•
Unplugging one output will not cause interruption on the other one
•
Includes Universal power adapter with interchangeable AC plugs
•
HDCP Compliant
3.0 Setup
The Splitter is plug and play. Connect the source to the splitter using quality
HDMI cables. Connect each output to respective displays. Plug the included
power supply to the splitter. If needed connect headphones or audio amp to the
audio outputs of the splitter.
Note that if no display is hooked up to the outputs or if both displays are
turned off - no HPD (Hot-Plug Detect) is being received by the splitter, it will
use an internal EDID which requests 2-Channel stereo audio from the source.
By default the Splitter will use the EDID from the display connected to Output
#1. If output #1 is off or not connected, then it will use EDID from Output #2,
and if #2 is missing also, it will use internal EDID.
If source is sending multi-channel audio, the 3.5mm analog output is muted
and extracted audio output will only be available as digital on the TOSLINK
optical output.
Figure 3 – Front and Rear Panels
Summary of Contents for SP-HD-2A
Page 2: ......
