![background image](http://html1.mh-extra.com/html/panduit/fk2bj/fk2bj_installation-instructions_3458973001.webp)
INSTALLATION INSTRUCTIONS PN155B
© Panduit Corp. 2006
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 4
O
PTICOM
Furcation Kit
Part Numbers: FK2BJ, FK4BJ
FK4BJ
INCLUDES: FOUR 1-METER FURCATION TUBES AND
ONE 3” X3/8” DIAMETER HEAT SHRINK TUBE
FK2BJ
INCLUDES: TWO 1-METER FURCATION
TUBES AND ONE 3” X1/4” DIAMETER
HEAT SHRINK TUBE
CONTENTS
OR
TOOLS
CABLE JACKET
STRIPPER (CST-115)
ARAMID YARN
CUTTER (FKC)
HEAT GUN
(HSG-115V-300)
MARKING PEN
(PFX-0)
UTILITY KNIFE
TAPE MEASURE
PRECAUTIONS
1. SAFETY GLASSES
WARNING: It is strongly recommended that
safety glasses be worn when handling bare
optical fiber. The bare fiber is very sharp and
can easily damage the eye.
2. DISPOSAL OF BARE FIBERS
WARNING: Pick up and discard all pieces of
bare fiber with sticky tabs. Do not let cut pieces
of fiber stick to clothing or drop in the work
area where they are hard to see and can
cause injury.
3. LASER LIGHT PROTECTION
WARNING: Laser light is invisible. The invisi-
ble light is powerful enough to damage your
eyes. Serious damage to the retina of the eye
is possible. Never look into the end of a fiber
which may have a laser coupled into it. Should
accidental eye exposure to laser light be sus-
pected, arrange for an eye examination imme-
diately.
4. CABLE HANDLING
WARNING: Fiber optic cable can be damaged
by excessive pulling, twisting, crushing or
bending stresses. Consult the appropriate
specification sheets as provided by your cable
vendor. Any damage may result in decreased
optical performance.