HR FHD264-R, User Manual

Page: 11 / 28

Dynamic Virtual Matrix™
© Copyright 2018 Hall Research, Inc.
11
4.2 WebGUI
The WebGUI can be used to change the following configuration settings:

Device Info -- Device ID, Group ID

Password -- Enable Login, Change Password

RS-232 Baud Rate

Firmware Upgrade

Network Settings

Scaler Settings (only for Sender)

Encoder Settings (only for Sender)

System Settings (only for Receiver) -- Fail-Safe, OSD, Debug (for
troubleshooting)
Both encoders and decoders can be password protected with a User Login, which is enabled
from the WebGUI.
Figure 7 – FHD264 Login Page
Default Username is admin and password is admin
Figure 8 - Sender WebGUI
Note : Changing IP configuration settings via WebGUI requires a Reboot in order to take
effect.