HR FHD264-R, User Manual

Page: 10 / 28

FHD264
10
© Copyright 2018 Hall Research, Inc.
4.1 Font Panel Operation
Use the front panel to change the Group ID, IP Configuration and RS-232 Baud Rate. By
default, after the FHD264 gets initialized, it shows the home screen with Device ID and Group
ID. To see the system configuration, click the MENU Button and use the NAVIGATION (NAV)
keys to view various settings. To change the settings, hold the MENU button until the setting
name starts blinking. Use NAV keys to change the parameters of the setting and click MENU
to apply setting or Hold MENU to discard setting. Follow the messages on the LCD for further
instructions.
Figure 6 - Front panel operation
4.1.1 Changing IP address from Front panel
To change the IP address from the front panel, make sure DHCP is turned OFF. The steps
are as follows

From Home Screen push MENU

NAV to IP configuration ("-- IP--")

Hold MENU until setting name ("--IP--") starts blinking

By default, the first octet in the IP address starts blinking

Use NAV keys to change the octet parameter or click MENU to move to the next
octet

After the reaching the 4th octet, click MENU to change the IP address.

At any point time, if the setting name is blinking, hold MENU to discard the changes